Results 1 - 24 of 24

Bench Parts

91237A Hex Bolt 10.9 L=80mm

10.9 hardness 16mm x 80 fully threaded bolt for chassis clamp.

 Save money when you purchase a chassis clamp hardware kit.

Hardware Kit for 4 chassis clamps

Save money when you purchase this hardware kit for 4 (1 set) of chassis clamps.  All hardware is 10.9 hardness (25% harder than original).

 

91008A M16 x 100mm Hex bolt for tie bar

10.9 hardness 16mm x 100 partial threaded bolt for chassis clamp.

 Save money when you purchase a chassis clamp hardware kit.

91610A M16 Nut for Tie Bar

16mm double thick hex nut for tie bar on standard chassis clamp.

 Save money when you purchase a chassis clamp hardware kit.

91611B 16mm Triple height nut for pinchweld clamp

16mm triple thick nut 10.9 hardness for pinchweld clamping on chassis clamp. 

 Save money when you purchase a chassis clamp hardware kit.

91302A 16mm Double thick wide washer for pinch weld

16mm double thick wide washer for pinch weld of chassis clamp.

 Save money when you purchase a chassis clamp hardware kit.

91318A 16mm Washer for tie bar

16mm washer for tie bar on chassis clamp.

 Save money when you purchase a chassis clamp hardware kit.

30952 Fixed Wheel for Draw-A-Ligner

This is a exact metric sized replacement for the front (straight) wheel on the puller.  The wheel now includes a support to lessen accidental crushing.

30953 Swivel Wheel for Draw-A-Liner

This is a direct replacement for the metric sized swivel wheel on the puller.

Truck Anchoring Kit (parts update)

With many new trucks and SUVs that have hit the road in the past few years, Car-o-liner has continued to provide the most secure anchoring.  This update kit ...

#0450 Flash Clamp™ 5-ton

New Mo-Grip™ surfaced jaws provide superior traction when coupled with pivoting head for uneven surfaces. Spring-loaded operation means no impacting to tighten. Heat-treated investment cast ...

#4030 Three-Way Pull Clamp®

Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop.

Gripping Surface: 4" wide (102 mm), 1/2 " deep (19 mm)
Overall Length: 8" (203 ...

#4035 Angle Bracket™

Bolt to surface for a 90-degree straight pull or use with #4030 3-Way Pull Clamp, pair of #4025 Frame Rack Jaws or #4010 Frame Rack Unibody Clamp..

Overall Length: 6" (152 mm)
Weight: ...

#5851 Hybrid Tong™ Clamp

Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made of Tru-Tuff heat-treated steel alloy.

Overall Length: 12" (305mm)

OTC-33853 Gasket for 4020 Pump

This is the "cork" gasket for the OTC-4020 hydraulic pump.

30719 B250-5 Bolt 20 x 220 mm for Truck Clamp

This specially made bolt is designed for the B250 clamp of the truck anchoring kit. It is 20 mm thick and the shaft is 200 mm long.  Part number 131-116-6203.

 

If ...

30696 B250-16 Nut for B250 Truck Clamp

This specially made nut is designed for the B250 clamp of the truck anchoring kit. It fits the 20 mm thick by 200 mm long bolt .  Part number 131-116-6104.

 

If ...

30720 B260-14 Bolt for B260 Truck Clamp

This specially made bolt is designed for the B260 clamp of the truck anchoring kit. It is 20 mm thick and the shaft is 320 mm long.  Part number ...

32699 Lifting Pad for Speed

Rubber Lifting Pad for Speed (only). Some items in picture are not included.

SD1 Shadow Decals for Pulling Clamps

Shadow Decals for Pulling Clamps and Accessories (NEW)

This set of ...